Z Lift
From MatterControl Manual
< SETTINGS | Filament | Retraction | While Printing
Revision as of 15:31, 30 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The distance the nozzle will lift after each retraction.|*millimeters (mm)| === mm === In this example, the nozzle will lift 0.3 mm after every retraction.}}")
Function
The distance the nozzle will lift after each retraction.
Parameters
- millimeters (mm)
Example(s)
mm
In this example, the nozzle will lift 0.3 mm after every retraction.
