Difference between revisions of "SETTINGS/Filament/Temperatures/Bed Temperatures/Bed Remove Part Temperature"

From MatterControl Manual
Jump to: navigation, search
m (Text replacement - "[[Slice Settings/" to "[[Settings/")
Line 11: Line 11:
 
=== degrees ===
 
=== degrees ===
  
In this example, the bed will cool to 55 degrees after the print as specified in the [[Slice Settings/Printer/Custom G-Code/End G-Code|End G-Code]] field, assuming the variable is used.}}
+
In this example, the bed will cool to 55 degrees after the print as specified in the [[Settings/Printer/Custom G-Code/End G-Code|End G-Code]] field, assuming the variable is used.}}

Revision as of 14:26, 20 January 2016

A screenshot of the Bed Remove Part Temperature setting as seen in MatterControl's SETTINGS pane.

Function

The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.

Used only by Custom G-Code fields as a Custom G-Code variable.

Parameters

  • degrees Celsius

Custom G-Code Variable

bed_remove_part_temperature

Example(s)

degrees

In this example, the bed will cool to 55 degrees after the print as specified in the End G-Code field, assuming the variable is used.

Bed Remove Part Temperature-ss-ex.png