Difference between revisions of "SETTINGS/Filament/Temperatures/Bed Temperatures/Bed Remove Part Temperature"

From MatterControl Manual
Jump to: navigation, search
 
(5 intermediate revisions by one other user not shown)
Line 1: Line 1:
 +
{{Migrated|slice-settings/filament/advanced#bed-remove-part-temperature}}
 
{{Slice Settings
 
{{Slice Settings
  
 
|The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.
 
|The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.
  
Used only by Custom G-Code fields as a [[Custom G-Code Variables|Custom G-Code variable]].|*degrees Celsius
+
Used only by Custom G-Code fields as a [[Custom G-Code Variables|Custom G-Code variable]].
 +
 
 +
=== Restrictions ===
 +
 
 +
*Not shown if [[SETTINGS/Printer/Features/Hardware/Has Heated Bed|Has Heated Bed]] is disabled.|*degrees Celsius
  
 
== [[Custom G-Code Variables|Custom G-Code Variable]] ==
 
== [[Custom G-Code Variables|Custom G-Code Variable]] ==
Line 11: Line 16:
 
=== degrees ===
 
=== degrees ===
  
In this example, the bed will cool to 55 degrees after the print as specified in the [[Slice Settings/Printer/Custom G-Code/End G-Code|End G-Code]] field, assuming the variable is used.}}
+
In this example, the bed will cool to 55 degrees after the print as specified in the [[Settings/Printer/Custom G-Code/End G-Code|End G-Code]] field, assuming the variable is used.}}

Latest revision as of 19:45, 7 January 2019

Merge

Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/.
This page is in the process of being migrated. It's new home will be matterhackers.com/mattercontrol/support/slice-settings/filament/advanced#bed-remove-part-temperature.

A screenshot of the Bed Remove Part Temperature setting as seen in MatterControl's SETTINGS pane.

Function

The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.

Used only by Custom G-Code fields as a Custom G-Code variable.

Restrictions

Parameters

  • degrees Celsius

Custom G-Code Variable

bed_remove_part_temperature

Example(s)

degrees

In this example, the bed will cool to 55 degrees after the print as specified in the End G-Code field, assuming the variable is used.

Bed Remove Part Temperature-ss-ex.png