Bed Remove Part Temperature
From MatterControl Manual
< SETTINGS | Filament | Temperatures | Bed Temperatures
Revision as of 18:31, 29 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The temperature to which the bed will heat (or cool) in order to remove the part. Used only by Custom G-Code fields as a Custom GCode Variables|Custom GC...")
Function
The temperature to which the bed will heat (or cool) in order to remove the part.
Used only by Custom G-Code fields as a Custom GCode variable.
Parameters
- degrees Celsius
Custom GCode Variable
bed_remove_part_temperature
Example(s)
degrees
In this example, the bed will cool to 55 degrees after the print as specified in the End GCode field, assuming the variable is used.
