Bed Remove Part Temperature

From MatterControl Manual
< SETTINGS‎ | Filament‎ | Temperatures‎ | Bed Temperatures
Revision as of 11:37, 13 January 2016 by MatterHackers (Talk | contribs) (Undo revision 1300 by MatterHackers (talk))

Jump to: navigation, search
A screenshot of the Bed Remove Part Temperature setting as seen in MatterControl's SETTINGS pane.

Function

The temperature to which the bed will heat (or cool) in order to remove the part, as specified in Custom G-Code.

Used only by Custom G-Code fields as a Custom GCode variable.

Parameters

  • degrees Celsius

Custom GCode Variable

bed_remove_part_temperature

Example(s)

degrees

In this example, the bed will cool to 55 degrees after the print as specified in the End GCode field, assuming the variable is used.

Bed Remove Part Temperature-ss-ex.png