Bed Temperature

From MatterControl Manual
< SETTINGS‎ | Filament‎ | Temperatures‎ | Bed Temperatures
Revision as of 18:02, 29 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The temperature to which the bed will be set for the duration of the print. Set to 0 to disable.|*degrees Celsius| === degrees === In this example, the be...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the Bed Temperature setting as seen in MatterControl's SETTINGS pane.

Function

The temperature to which the bed will be set for the duration of the print. Set to 0 to disable.

Parameters

  • degrees Celsius

Example(s)

degrees

In this example, the bed will be set to 50 degrees Celsius for the print.

Bed Temperature-ss-ex.png