Extruder Wipe Temperature

From MatterControl Manual
Jump to: navigation, search
A screenshot of the Extruder Wipe Temperature setting as seen in MatterControl's SETTINGS pane.

Function

The temperature at which the extruder will wipe the nozzle, as specified in Custom G-Code.

Used only by Custom G-Code fields as a Custom GCode variable.

Parameters

  • degrees Celsius

Custom GCode Variable

extruder_wipe_temperature

Example(s)

degrees

In this example, the nozzle will heat to 145 degrees as specified in the Start GCode field, assuming the variable is used.

Extruder Wipe Temperature-ss-ex.png