Difference between revisions of "SETTINGS/General/Infill/Advanced/Starting Angle"
From MatterControl Manual
| Line 7: | Line 7: | ||
=== degrees === | === degrees === | ||
| − | This infill is tilted 35 degrees from | + | This infill is tilted 35 degrees from the X axis.}} |
Revision as of 17:58, 19 January 2016
Function
The angle of the infill, measured from the X axis. Not used when bridging.
Parameters
- degrees
Can be zero.
Example(s)
degrees
This infill is tilted 35 degrees from the X axis.
