Difference between revisions of "SETTINGS/General/Layers-Surface/Layer Height/Layer Height"

From MatterControl Manual
Jump to: navigation, search
Line 1: Line 1:
 
{{Slice Settings
 
{{Slice Settings
  
|The height of each layer of the print, except the first. A smaller number will create more layers and more vertical accuracy but also a slower print.|*millimeters (mm)|
+
|The height of each layer of the print, except the [[Slice_Settings/General/Layers-Surface/Layer_Height/First_Layer_Height|first]]. A smaller number will create more layers and more vertical accuracy but also a slower print.|*millimeters (mm)|
  
 
=== mm ===
 
=== mm ===

Revision as of 14:11, 12 January 2016

A screenshot of the Layer Height setting as seen in MatterControl's SETTINGS pane.

Function

The height of each layer of the print, except the first. A smaller number will create more layers and more vertical accuracy but also a slower print.

Parameters

  • millimeters (mm)

Example(s)

mm

Shown here in 3D Layer View, this 10mm high box has a layer height of 0.2mm.


Layer Height-ss-ex.png