Layer Height
From MatterControl Manual
< SETTINGS | General | Layers-Surface | Layer Height
Revision as of 15:44, 17 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |Sets the height of each layer of the print. A smaller number will create more layers and more vertical accuracy but also a slower print.|Millimeters| === m...")
Function
Sets the height of each layer of the print. A smaller number will create more layers and more vertical accuracy but also a slower print.
Parameters
Millimeters
Example(s)
mm
Shown here in 3D Layer View, this 10mm high box has a layer height of 0.2mm.
