Top Solid Layers
From MatterControl Manual
< SETTINGS | General | Layers-Surface | Outer Surface - Top & Bottom
Revision as of 13:37, 1 December 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Settings/General/Layers-Surface/Outer Surface - Top & Bottom/Top Solid Layers to SETTINGS/General/Layers-Surface/Outer Surface - Top & Bottom/Top Solid Layers)
Function
The number of layers, or the distance in millimeters, to solid fill on the top surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
Parameters
- count
- millimeters (mm)
Can be zero.
Example(s)
count
The default. Specify a number to indicate the number of layers that will be solid on the top surface(s) of the print.
mm
Specify a number with 'mm' immediately after to indicate the distance in millimeters that will be solid on the top surface(s) of the print.