Top Solid Layers

From MatterControl Manual
< SETTINGS‎ | General‎ | Layers-Surface‎ | Outer Surface - Top & Bottom
Revision as of 11:42, 5 September 2018 by Tanderson (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Merge

Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/.
This page is in the process of being migrated. It's new home will be matterhackers.com/mattercontrol/support/slice-settings/general/general#top-solid-layers.

A screenshot of the Top Solid Layers setting as seen in MatterControl's SETTINGS pane.

Function

The number of layers, or the distance in millimeters, to solid fill on the top surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.

Parameters

  • count
  • millimeters (mm)

Can be zero.

Example(s)

count

The default. Specify a number to indicate the number of layers that will be solid on the top surface(s) of the print.

Top Solid Layers-ss-ex.png

mm

Specify a number with 'mm' immediately after to indicate the distance in millimeters that will be solid on the top surface(s) of the print.

Top Solid Layers-ss-ex1.png