Top Solid Layers
From MatterControl Manual
< SETTINGS | General | Layers-Surface | Outer Surface - Top & Bottom
Revision as of 15:50, 17 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The number of layers, or the distance in millimeters, that will be solid filled on the top surface(s) of the object. Add mm to the end of the number to spec...")
Function
The number of layers, or the distance in millimeters, that will be solid filled on the top surface(s) of the object. Add mm to the end of the number to specify distance in millimeters.
Parameters
Count or mm
Can be zero.
Example(s)
count
The default. Specify a number to indicate the number of layers that will be solid on the top surface(s) of the print.
mm
Specify a number with 'mm' immediately after to indicate the distance in millimeters that will be solid on the top surface(s) of the print.
