Difference between revisions of "SETTINGS/General/Multiple Extruders/Extruder Change/Wipe Shield Distance"
From MatterControl Manual
< SETTINGS | General | Multiple Extruders | Extruder Change
(Created page with "{{Slice Settings |Creates a perimeter around the part on which to wipe the other, unused nozzle when printing using dual extrusion. <nowiki>*</nowiki>Experimental feature.|*...") |
(No difference)
|
Revision as of 18:26, 22 December 2015
Function
Creates a perimeter around the part on which to wipe the other, unused nozzle when printing using dual extrusion.
*Experimental feature.
Parameters
- millimeters (mm)
Example(s)
mm
For this example, Calibration - Box.stl is the model used.
In this example, two Calibration Boxes are side-by-side, each printed by a different extruder. The wipe shield can be seen around the perimeter.
