Difference between revisions of "SETTINGS/General/Multiple Extruders/Extruder Change/Wipe Shield Distance"

From MatterControl Manual
Jump to: navigation, search
(Created page with "{{Slice Settings |Creates a perimeter around the part on which to wipe the other, unused nozzle when printing using dual extrusion. <nowiki>*</nowiki>Experimental feature.|*...")
 
Line 1: Line 1:
 
{{Slice Settings
 
{{Slice Settings
  
|Creates a perimeter around the part on which to wipe the other, unused nozzle when printing using dual extrusion.
+
|Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.
  
 
<nowiki>*</nowiki>Experimental feature.|*millimeters (mm)|
 
<nowiki>*</nowiki>Experimental feature.|*millimeters (mm)|

Revision as of 18:28, 22 December 2015

A screenshot of the Wipe Shield Distance setting as seen in MatterControl's SETTINGS pane.

Function

Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.

*Experimental feature.

Parameters

  • millimeters (mm)

Example(s)

mm

For this example, Calibration - Box.stl is the model used.

In this example, two Calibration Boxes are side-by-side, each printed by a different extruder. The wipe shield can be seen around the perimeter.

Wipe Shield Distance-ss-ex.png