Difference between revisions of "SETTINGS/General/Multiple Extruders/Extruder Change/Wipe Shield Distance"

From MatterControl Manual
Jump to: navigation, search
 
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
 +
{{Migrated|slice-settings/general/extruder-change#wipe-shield-distance}}
 
{{Slice Settings
 
{{Slice Settings
  
Line 9: Line 10:
 
For this example, [http://104.154.32.252/images/0/0d/Calibration_-_Box.stl Calibration - Box.stl] is the model used.
 
For this example, [http://104.154.32.252/images/0/0d/Calibration_-_Box.stl Calibration - Box.stl] is the model used.
  
In this example, two Calibration Boxes are side-by-side, each printed by a different extruder. The wipe shield can be seen around the perimeter.}}
+
In this example, two Calibration Boxes are side-by-side, each printed by a different extruder. The wipe shield can be seen around the perimeter, 6 mm away from the model.}}

Latest revision as of 11:54, 19 September 2018

Merge

Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/.
This page is in the process of being migrated. It's new home will be matterhackers.com/mattercontrol/support/slice-settings/general/extruder-change#wipe-shield-distance.

A screenshot of the Wipe Shield Distance setting as seen in MatterControl's SETTINGS pane.

Function

Creates a perimeter around the part on which to wipe the other nozzle when printing using dual extrusion. Set to 0 to disable.

*Experimental feature.

Parameters

  • millimeters (mm)

Example(s)

mm

For this example, Calibration - Box.stl is the model used.

In this example, two Calibration Boxes are side-by-side, each printed by a different extruder. The wipe shield can be seen around the perimeter, 6 mm away from the model.

Wipe Shield Distance-ss-ex.png