234
edits
Changes
no edit summary
{{Migrated|slice-settings/adhesion/raft#air-gap}}
{{Slice Settings
|The distance between the first layer and the top of the raft. A good value is typically about half the [[Slice Settings/Printer/Extruder/Extruder X/Nozzle Diameter|extrusion diameter]]. For a 0.4 mm nozzle, a value between 0.0 and 0.2 would be best.|*millimeters (mm)|
=== mm ===
In this example, a 0.2 mm gap will be left between the raft and the first layer.}}