Air Gap
From MatterControl Manual
< SETTINGS | General | Raft-Priming | Raft
Revision as of 13:55, 20 January 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Slice Settings/General/Skirt and Raft/Raft/Air Gap to Settings/General/Skirt and Raft/Raft/Air Gap without leaving a redirect)
Function
The distance between the first layer and the top of the raft. A good value is typically about half the extrusion diameter. For a 0.4 mm nozzle, a value between 0.0 and 0.2 would be best.
Parameters
- millimeters (mm)
Example(s)
mm
In this example, a 0.2 mm gap will be left between the raft and the first layer.
