Fan Speed

From MatterControl Manual
Jump to: navigation, search
A screenshot of the Fan Speed setting as seen in MatterControl's SETTINGS pane.

Function

The speed at which the cooling fan(s) will run during the printing of the raft, expressed as a percentage of full power.

Parameters

  • percent (%)

While the value can be any whole number from 0-100, the following values will produce these effects:

0% : off
50% : half speed
100% : full speed

Example(s)

%

At 100% the cooling fan(s) will be on at full blast during the printing of the raft.

Fan Speed-ss-ex.png