Difference between revisions of "SETTINGS/General/Raft-Priming/Skirt/Distance or Loops"

From MatterControl Manual
Jump to: navigation, search
Line 1: Line 1:
 
{{Slice Settings
 
{{Slice Settings
  
|The number of loops to draw around all the parts on the bed before starting on the parts. Used mostly to prime the nozzle so the flow is even when the actual print begins.|*count|
+
|The number of loops to draw around all the parts on the bed before starting on the parts. Used mostly to prime the nozzle so the flow is even when the actual print begins.|*count or mm|
  
 
=== count ===
 
=== count ===
  
 
In this example, three loops will be drawn around the model.}}
 
In this example, three loops will be drawn around the model.}}

Revision as of 18:25, 31 July 2017

A screenshot of the Distance or Loops setting as seen in MatterControl's SETTINGS pane.

Function

The number of loops to draw around all the parts on the bed before starting on the parts. Used mostly to prime the nozzle so the flow is even when the actual print begins.

Parameters

  • count or mm

Example(s)

count

In this example, three loops will be drawn around the model.

Distance or Loops-ss-ex.png