Difference between revisions of "SETTINGS/General/Speed/Modifiers/First Layer Speed"
From MatterControl Manual
| Line 2: | Line 2: | ||
|The speed at which the nozzle will move when printing the first layer. If expressed as a percentage the Infill speed is modified.|*millimeters per second (mm/s) | |The speed at which the nozzle will move when printing the first layer. If expressed as a percentage the Infill speed is modified.|*millimeters per second (mm/s) | ||
| − | *percent [of [[Slice Settings/General/Speed/Speed for Infill/Infill|Infill speed]]] (%)| | + | *percent [of [[Slice Settings/General/Speed/Speed for Infill/Infill|Infill speed]]] (%) |
| + | |||
| + | == [[Custom GCode Variables|Custom GCode Variable]] == | ||
| + | |||
| + | <code>first_layer_speed</code>| | ||
=== mm/s === | === mm/s === | ||
Revision as of 11:38, 13 January 2016
Function
The speed at which the nozzle will move when printing the first layer. If expressed as a percentage the Infill speed is modified.
Parameters
- millimeters per second (mm/s)
- percent [of Infill speed] (%)
Custom GCode Variable
first_layer_speed
Example(s)
mm/s
In this example, the first layer will print at 20 mm/s.
%
In this example, the first layer will print at 35% of the Infill speed (which for this example is set at 40), so the final speed will be 14 mm/s.
