Changes

SETTINGS/General/Speed/Modifiers/First Layer Speed

5 bytes removed, 00:55, 22 December 2015
no edit summary
|The speed at which the nozzle will move when printing the first layer. If expressed as a percentage the Infill speed is modified.|*millimeters per second (mm/s)
*percentage percent [of [[Slice Settings/General/Speed/Speed for Infill/Infill|Infillspeed]]] (%)|
=== mm/s ===
=== % ===
In this example, the first layer will print at 35% percent of the Infill speed (which for this example is set at 40), so the final speed will be 14 mm/s.
[[File:{{SUBPAGENAME}}-ss-ex1.png]]