Open main menu

Changes

SETTINGS/General/Speed/Speed for Infill/Raft

432 bytes added, 23:23, 12 September 2018
no edit summary
{{Migrated|slice-settings/speed/speed#raft}}
{{Slice Settings
|Function textThe speed at which the layers of the raft (other than the first layer) will print.|Parameters text*millimeters per second (mm/s)*percent [of [[Settings/General/Speed/Speed_for_Infill/Infill|Infill speed]]] (%)
=== Parameter 1 =[[Custom G-Code Variables|Custom G-Code Variable]] ==
Caption for Example for Parameter 1.}}<code>raft_print_speed</code>|
=== Parameter 2 mm/s ===
Caption for In this example for Parameter 2, the raft infill will print at 35 mm/s.}} === % === In this example, the raft infill will print at 75% of the Infill speed (which if you can make out the blurred text is set at 40), so the final result will be 30 mm/s.
[[File:{{SUBPAGENAME}}-ss-ex1.png]]