Difference between revisions of "SETTINGS/General/Speed/Speed for Non-Print Moves/Travel"

From MatterControl Manual
Jump to: navigation, search
Line 1: Line 1:
 
{{Slice Settings
 
{{Slice Settings
  
|Speed at which the nozzle will move when not extruding material.|*millimeters per second (mm/s)|
+
|The speed at which the nozzle will move when not extruding material.|*millimeters per second (mm/s)|
  
 
=== mm/s ===
 
=== mm/s ===

Revision as of 17:07, 12 January 2016

A screenshot of the Travel setting as seen in MatterControl's SETTINGS pane.

Function

The speed at which the nozzle will move when not extruding material.

Parameters

  • millimeters per second (mm/s)

Example(s)

mm/s

In the example below, the nozzle will travel at 300 mm/s when it is moving across the print and not extruding.

Travel-ss-ex.png