Difference between revisions of "SETTINGS/General/Speed/Speed for Non-Print Moves/Travel"

From MatterControl Manual
Jump to: navigation, search
(Created page with "{{Slice Settings |Speed at which the nozzle will move when not extruding material.|*millimeters per second (mm/s)| === mm/s === In the example below, the nozzle will travel...")
 
 
(7 intermediate revisions by one other user not shown)
Line 1: Line 1:
 +
{{Migrated|slice-settings/speed/speed#travel}}
 
{{Slice Settings
 
{{Slice Settings
  
|Speed at which the nozzle will move when not extruding material.|*millimeters per second (mm/s)|
+
|The speed at which the nozzle will move when not extruding material.|*millimeters per second (mm/s)
 +
 
 +
== [[Custom G-Code Variables|Custom G-Code Variable]] ==
 +
 
 +
<code>travel_speed</code>|
  
 
=== mm/s ===
 
=== mm/s ===
  
 
In the example below, the nozzle will travel at 300 mm/s when it is moving across the print and not extruding.}}
 
In the example below, the nozzle will travel at 300 mm/s when it is moving across the print and not extruding.}}

Latest revision as of 14:32, 13 September 2018

Merge

Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/.
This page is in the process of being migrated. It's new home will be matterhackers.com/mattercontrol/support/slice-settings/speed/speed#travel.

A screenshot of the Travel setting as seen in MatterControl's SETTINGS pane.

Function

The speed at which the nozzle will move when not extruding material.

Parameters

  • millimeters per second (mm/s)

Custom G-Code Variable

travel_speed

Example(s)

mm/s

In the example below, the nozzle will travel at 300 mm/s when it is moving across the print and not extruding.

Travel-ss-ex.png