Travel

From MatterControl Manual
< SETTINGS‎ | General‎ | Speed‎ | Speed for Non-Print Moves
Revision as of 15:28, 21 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |Speed at which the nozzle will move when not extruding material.|*millimeters per second (mm/s)| === mm/s === In the example below, the nozzle will travel...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the Travel setting as seen in MatterControl's SETTINGS pane.

Function

Speed at which the nozzle will move when not extruding material.

Parameters

  • millimeters per second (mm/s)

Example(s)

mm/s

In the example below, the nozzle will travel at 300 mm/s when it is moving across the print and not extruding.

Travel-ss-ex.png