Difference between revisions of "SETTINGS/General/Speed/Speed for Other Printing/Support Material"
From MatterControl Manual
< SETTINGS | General | Speed | Speed for Other Printing
(Created page with "{{Slice Settings1 |The speed at which support material structures will be printed.|Millimeters per second| === mm/s === In this example, the support material will print at...") |
(No difference)
|
Revision as of 17:49, 18 December 2015
Function
The speed at which support material structures will be printed.
Parameters
Millimeters per second
Example(s)
mm/s
In this example, the support material will print at 35 mm/s.