Difference between revisions of "SETTINGS/General/Speed/Speed for Other Printing/Support Material"

From MatterControl Manual
Jump to: navigation, search
Line 1: Line 1:
 
{{Slice Settings1
 
{{Slice Settings1
  
|The speed at which support material structures will be printed.|*millimeters per second (mm/s)|
+
|The speed at which support material structures will print.|*millimeters per second (mm/s)|
  
 
=== mm/s ===
 
=== mm/s ===
  
 
In this example, the support material will print at 35 mm/s.}}
 
In this example, the support material will print at 35 mm/s.}}

Revision as of 19:03, 18 December 2015

A screenshot of the Support Material setting as seen in MatterControl's SETTINGS pane.

Function

The speed at which support material structures will print.

Parameters

  • millimeters per second (mm/s)

Example(s)

mm/s

In this example, the support material will print at 35 mm/s.

Support Material1-ss-ex.png