Difference between revisions of "SETTINGS/General/Speed/Speed for Perimeters/Outside Perimeter"

From MatterControl Manual
Jump to: navigation, search
m (Text replacement - "[[Slice_Settings" to "[[Settings")
(No difference)

Revision as of 13:37, 1 December 2016

A screenshot of the Outside Perimeter setting as seen in MatterControl's SETTINGS pane.

Function

The speed at which outside, external, or the otherwise visible perimeters will print.

Parameters

Custom G-Code Variable

external_perimeter_speed

Example(s)

mm/s

In this example, the outside perimeters will print at 25 mm/s.

Outside Perimeter-ss-ex.png

%

In this example, the outside perimeters will print at 60% of the Inside Perimeters speed (which if you can make out the blurred text is set at 40), so the final result will be 24 mm/s.

Outside Perimeter-ss-ex1.png