Outside Perimeter

From MatterControl Manual
< SETTINGS‎ | General‎ | Speed‎ | Speed for Perimeters
Revision as of 17:31, 12 September 2018 by Tanderson (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/.
This page is in the process of being migrated. It's new home will be matterhackers.com/mattercontrol/support/slice-settings/speed/speed#outside-perimeter.

A screenshot of the Outside Perimeter setting as seen in MatterControl's SETTINGS pane.


The speed at which outside, external, or the otherwise visible perimeters will print.


Custom G-Code Variable




In this example, the outside perimeters will print at 25 mm/s.

Outside Perimeter-ss-ex.png


In this example, the outside perimeters will print at 60% of the Inside Perimeters speed (which if you can make out the blurred text is set at 40), so the final result will be 24 mm/s.

Outside Perimeter-ss-ex1.png