Outside Perimeter

From MatterControl Manual
Jump to: navigation, search
A screenshot of the Outside Perimeter setting as seen in MatterControl's SETTINGS pane.

Function

The speed at which outside, external, or the otherwise visible perimeters will be printed.

Parameters

Millimeters per second (mm/s) or percentage [of inside perimeters].

Example(s)

mm/s

In this example, the outside perimeters will print at 25 mm/s.

Outside Perimeter-ss-ex.png

%

In this example, the outside perimeters will print at 60% of the Inside Perimeters speed (which if you can make out the blurred text is set at 40), so the final result will be 24 mm/s.

Outside Perimeter-ss-ex1.png