Support Interface Extruder
From MatterControl Manual
< SETTINGS | General | Support Material | Extruders
Revision as of 15:51, 22 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The index of the extruder to use for support material interface layer(s).|*para...")
Function
The index of the extruder to use for support material interface layer(s).
Parameters
- parameters text
Example(s)
Parameter 1
In this example, the first extruder will print the interface layer(s).
In this example, the second extruder will print the interface layer(s).
