Difference between revisions of "SETTINGS/General/Support Material/Support Material/Support Type"

From MatterControl Manual
Jump to: navigation, search
(No difference)

Revision as of 13:37, 1 December 2016

A screenshot of the Support Type setting as seen in MatterControl's SETTINGS pane.

Function

The pattern to draw for the generation of support material.

Parameters

Available as presets only:

  • GRID
  • LINES

Example(s)

For these examples, Support_test.stl is the model used.

GRID

The GRID support material type, shown here in 3D Layer View at full height before the overhang.

Support Type-ss-ex.png

LINES

The LINES support material type, shown here in 3D Layer View at full height before the overhang.

Support Type-ss-ex1.png