Difference between revisions of "SETTINGS/General/Support Material/Support Options/Infill Angle"

From MatterControl Manual
Jump to: navigation, search
(No difference)

Revision as of 13:37, 1 December 2016

A screenshot of the Infill Angle setting as seen in MatterControl's SETTINGS pane.

Function

The angle at which the support material lines will be drawn.

Parameters

  • degrees

Can be zero.

Example(s)

For this example, Support_test.stl is the model used.

degrees

In this example, the infill angle is 60 degrees as shown on the first layer of the model in 2D Layer View.

Infill Angle-ss-ex.png