Difference between revisions of "SETTINGS/General/Support Material/Support Options/Interface Layers"

From MatterControl Manual
Jump to: navigation, search
(Created page with "{{Slice Settings |The number of layers, or the distance, to print between the supports and the part.|*layer count (layers) *millimeters (mm) Can be zero.| === layers === I...")
 
(No difference)

Revision as of 13:55, 20 January 2016

A screenshot of the Interface Layers setting as seen in MatterControl's SETTINGS pane.

Function

The number of layers, or the distance, to print between the supports and the part.

Parameters

  • layer count (layers)
  • millimeters (mm)

Can be zero.

Example(s)

layers

In this example, three interface layers will be drawn above the support material and below the model.

Interface Layers-ss-ex.png

mm

In this example, 2 mm of interface layers will be drawn above the support material and below the model.

Interface Layers-ss-ex1.png