Difference between revisions of "SETTINGS/General/Support Material/Support Options/Interface Layers"

From MatterControl Manual
Jump to: navigation, search
(Created page with "{{Slice Settings |The number of layers, or the distance, to print between the supports and the part.|*layer count (layers) *millimeters (mm) Can be zero.| === layers === I...")
 
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
 +
{{Migrated|slice-settings/support/advanced#interface-layers}}
 
{{Slice Settings
 
{{Slice Settings
  

Latest revision as of 12:04, 31 December 2018

Merge

Migrating: For MatterControl 2.0 the MatterControl documentation is moving to matterhackers.com/mattercontrol/support/.
This page is in the process of being migrated. It's new home will be matterhackers.com/mattercontrol/support/slice-settings/support/advanced#interface-layers.

A screenshot of the Interface Layers setting as seen in MatterControl's SETTINGS pane.

Function

The number of layers, or the distance, to print between the supports and the part.

Parameters

  • layer count (layers)
  • millimeters (mm)

Can be zero.

Example(s)

layers

In this example, three interface layers will be drawn above the support material and below the model.

Interface Layers-ss-ex.png

mm

In this example, 2 mm of interface layers will be drawn above the support material and below the model.

Interface Layers-ss-ex1.png