Changes

Created page with "{{Slice Settings |The number of layers, or the distance, to print between the supports and the part.|*layer count (layers) *millimeters (mm) Can be zero.| === layers === I..."
{{Slice Settings

|The number of layers, or the distance, to print between the supports and the part.|*layer count (layers)
*millimeters (mm)

Can be zero.|

=== layers ===

In this example, three interface layers will be drawn above the support material and below the model.}}

=== mm ===

In this example, 2 mm of interface layers will be drawn above the support material and below the model.

[[File:{{SUBPAGENAME}}-ss-ex1.png]]