Interface Layers

From MatterControl Manual
< SETTINGS‎ | General‎ | Support Material‎ | Support Options
Revision as of 13:42, 22 December 2015 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The number of layers, or the distance, to print between the supports and the part.|*layer count (layers) *millimeters (mm) Can be zero.| === layers === I...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the Interface Layers setting as seen in MatterControl's SETTINGS pane.

Function

The number of layers, or the distance, to print between the supports and the part.

Parameters

  • layer count (layers)
  • millimeters (mm)

Can be zero.

Example(s)

layers

In this example, three interface layers will be drawn above the support material and below the model.

Interface Layers-ss-ex.png

mm

In this example, 2 mm of interface layers will be drawn above the support material and below the model.

Interface Layers-ss-ex1.png