Difference between revisions of "SETTINGS/General/Support Material/Support Options/Pattern Spacing"
From MatterControl Manual
< SETTINGS | General | Support Material | Support Options
(Created page with "{{Slice Settings |The distance between support material lines.|*millimeters (mm)| === mm === In this example, lines will be spaced at 2.5 mm intervals.}}") |
(No difference)
|
Revision as of 13:21, 22 December 2015
Function
The distance between support material lines.
Parameters
- millimeters (mm)
Example(s)
mm
In this example, lines will be spaced at 2.5 mm intervals.
