After Tool Change G-Code

From MatterControl Manual
< SETTINGS‎ | Printer‎ | Custom G-Code
Revision as of 14:41, 13 January 2016 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |G-Code to be run after every tool change (T0, T1, T2, etc.).|*G-Code Will accept Custom G-Code variables.| === G-Code === In...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the After Tool Change G-Code setting as seen in MatterControl's SETTINGS pane.

Function

G-Code to be run after every tool change (T0, T1, T2, etc.).

Parameters

  • G-Code

Will accept Custom G-Code variables.

Example(s)

G-Code

In this example, the printer will run a series of G-Code commands to wipe the nozzle after every T0, T1, T2, etc. during the print.

After Tool Change G-Code-ss-ex.png