After Tool Change G-Code

From MatterControl Manual
< SETTINGS‎ | Printer‎ | Custom G-Code
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the After Tool Change G-Code setting as seen in MatterControl's SETTINGS pane.


G-Code to be run after every tool change (T0, T1, T2, etc.).

NOTE: All Custom G-Code is subject to filtering rules.


All G-Code must be uppercase to function properly.



In this example, the printer will run a series of G-Code commands to wipe the nozzle after every T0, T1, T2, etc. during the print.

After Tool Change G-Code-ss-ex.png