End G-Code

From MatterControl Manual
< SETTINGS‎ | Printer‎ | Custom G-Code
Revision as of 13:37, 1 December 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Settings/Printer/Custom G-Code/End G-Code to SETTINGS/Printer/Custom G-Code/End G-Code)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the End G-Code setting as seen in MatterControl's SETTINGS pane.

Function

G-Code to be run at the end of all automatic output (the very end of the G-Code commands).

NOTE: All Custom G-Code is subject to filtering rules.

Parameters

All G-Code must be uppercase to function properly.

Example(s)

G-Code

In this example, the printer will home (G28) at the end of the print.

End G-Code-ss-ex.png