On Connect G-Code

From MatterControl Manual
< SETTINGS‎ | Printer‎ | Custom G-Code
Revision as of 15:09, 13 January 2016 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |G-Code to run upon successful connection to a printer. This can be useful to set settings specific to a given printer.|*G-Code Will accept Custom_G-Code_...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the On Connect G-Code setting as seen in MatterControl's SETTINGS pane.

Function

G-Code to run upon successful connection to a printer. This can be useful to set settings specific to a given printer.

Parameters

  • G-Code

Will accept Custom G-Code variables.

Example(s)

G-Code

In this example, the printer will home (G28) when MatterControl makes a successful connection.

On Connect G-Code-ss-ex.png