G-Code Output

From MatterControl Manual
< SETTINGS‎ | Printer‎ | Features‎ | Behavior
Revision as of 18:49, 11 January 2016 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The version of G-Code the printer's firmware communicates with.|Available as presets only: *REPRAP *ULTIGCODE *BFB *MACH3| === REPRAP === The most common...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the G-Code Output setting as seen in MatterControl's SETTINGS pane.

Function

The version of G-Code the printer's firmware communicates with.

Parameters

Available as presets only:

  • REPRAP
  • ULTIGCODE
  • BFB
  • MACH3

Example(s)

REPRAP

The most common version of G-Code. Documentation of commands can be found on the RepRap wiki.

G-Code Output-ss-ex.png

ULTIGCODE

Used with Ultimaker printers.

G-Code Output-ss-ex1.png

BFB

Stands for Bits For Bytes, a 3D printer manufacturer that no longer exists having been purchased by 3D Systems in 2010.

G-Code Output-ss-ex2.png

MACH3

A version of G-Code common to CNC mills.

G-Code Output-ss-ex3.png

Retrieved from "http://wiki.mattercontrol.com/index.php?title=SETTINGS/Printer/Features/Behavior/G-Code_Output&oldid=1255"