Difference between revisions of "SETTINGS/Printer/Features/Behavior/Z Can Be Negative"
From MatterControl Manual
(Blanked the page) |
m (Reverted edits by Tanderson (talk) to last revision by MatterHackers) |
||
| Line 1: | Line 1: | ||
| + | {{Slice Settings | ||
| + | |Allows the printer to attempt going below 0 along the Z axis during the [[Options/Software Print Leveling|Software Print Leveling]] wizard, and disables related warnings. Does not override actual endstops, physical or software. | ||
| + | |||
| + | === Restrictions === | ||
| + | |||
| + | *Not shown if [[SETTINGS/Printer/Features/Hardware/Has Hardware Leveling|Has Hardware Leveling]] is enabled as negative Z values can interfere with leveling processes.|*Boolean| | ||
| + | |||
| + | === Boolean === | ||
| + | |||
| + | The check box is checked to use the function.}} | ||
| + | |||
| + | The check box is unchecked to leave the function unused. | ||
| + | |||
| + | [[File:{{SUBPAGENAME}}-ss-ex1.png]] | ||
Revision as of 17:46, 31 July 2017
Function
Allows the printer to attempt going below 0 along the Z axis during the Software Print Leveling wizard, and disables related warnings. Does not override actual endstops, physical or software.
Restrictions
- Not shown if Has Hardware Leveling is enabled as negative Z values can interfere with leveling processes.
Parameters
- Boolean
Example(s)
Boolean
The check box is checked to use the function.
The check box is unchecked to leave the function unused.
