Z Can Be Negative

From MatterControl Manual
< SETTINGS‎ | Printer‎ | Features‎ | Behavior
Revision as of 17:46, 31 July 2017 by Tanderson (Talk | contribs) (Reverted edits by Tanderson (talk) to last revision by MatterHackers)

Jump to: navigation, search
A screenshot of the Z Can Be Negative setting as seen in MatterControl's SETTINGS pane.

Function

Allows the printer to attempt going below 0 along the Z axis during the Software Print Leveling wizard, and disables related warnings. Does not override actual endstops, physical or software.

Restrictions

  • Not shown if Has Hardware Leveling is enabled as negative Z values can interfere with leveling processes.

Parameters

  • Boolean

Example(s)

Boolean

The check box is checked to use the function.

Allow Negative Z-ss-ex.png

The check box is unchecked to leave the function unused.

Allow Negative Z-ss-ex1.png