Difference between revisions of "SETTINGS/Printer/Features/Hardware/Has Z Probe"
From MatterControl Manual
(Created page with "{{Slice Settings |The printer has a probe on the Z axis for bed leveling measurements.|*Boolean| === Boolean === The check box is checked to use the function.}} The check...") |
(No difference)
|
Latest revision as of 17:12, 31 July 2017
Function
The printer has a probe on the Z axis for bed leveling measurements.
Parameters
- Boolean
Example(s)
Boolean
The check box is checked to use the function.
The check box is unchecked to leave the function unused.
