Build Height
From MatterControl Manual
< SETTINGS | Printer | Print Area | Size and Coordinates
Revision as of 15:50, 11 January 2016 by MatterHackers (Talk | contribs) (Created page with "{{Slice Settings |The height of the printer's printable volume, in millimeters. Serves no purpose for slicing, but controls the height of the 3D View#Show Print Area|visual...")
Function
The height of the printer's printable volume, in millimeters. Serves no purpose for slicing, but controls the height of the visual print area displayed in 3D View.
Parameters
- millimeters (mm)
Example(s)
mm
In this example, the build height is set to 350 mm and is shown as such in the 3D View preview on the right.
