Build Height

From MatterControl Manual
< SETTINGS‎ | Printer‎ | Print Area‎ | Size and Coordinates
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
A screenshot of the Build Height setting as seen in MatterControl's SETTINGS pane.

Function

The height of the printer's printable volume, in millimeters. Controls the height of the visual print area displayed in 3D View.

Parameters

  • millimeters (mm)

Example(s)

mm

In this example, the build height is set to 350 mm and is shown as such in the 3D View preview on the right.

Build Height-ss-ex.png