Build Height

< SETTINGS‎ | Printer‎ | Print Area‎ | Size and Coordinates

Revision as of 13:37, 1 December 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Settings/Printer/Print Area/Size and Coordinates/Build Height to SETTINGS/Printer/Print Area/Size and Coordinates/Build Height)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Revision as of 13:37, 1 December 2016 by MatterHackers (Talk | contribs) (MatterHackers moved page Settings/Printer/Print Area/Size and Coordinates/Build Height to SETTINGS/Printer/Print Area/Size and Coordinates/Build Height)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

A screenshot of the Build Height setting as seen in MatterControl's SETTINGS pane.

Function

The height of the printer's printable volume, in millimeters. Controls the height of the visual print area displayed in 3D View.

Parameters

millimeters (mm)

Example(s)

mm

In this example, the build height is set to 350 mm and is shown as such in the 3D View preview on the right.

Build Height-ss-ex.png

Last modified on 1 December 2016, at 13:37